How to Yip Smart Tag Battery Replacement

Welcome to our comprehensive guide on Yip Smart Tag battery replacement! Yip Smart Tags are a great way to keep track of your belongings.

However, when the battery runs out, it’s important to know how to replace it. Here are the steps to follow:

What You’ll Need for Yip Smart Tag Battery Replacement:

Need for Yip Smart Tag Battery Replacement
  • A fresh CR2032 coin-cell battery (the lifeblood of your Yip Smart Tag!)
  • A small flathead screwdriver (optional, but your fingernail can be your hero 😉)

Ready, Set, Yip Smart Tag Battery Replacement!

Ready, Yip Smart Tag Battery Replacement!

In these 6 steps, we’ll walk you through the simple steps to Yip Smart Tag battery replacement, ensuring your tracking device remains in top-notch condition. Let’s Go 🚗

  1. Pop the Top: Use a quarter or your trusty fingernail to pry open the back cover. Look for a tiny notch or indentation – it’s your secret entrance!
  2. Meet the Powerhouse: Inside, you’ll find the battery snuggled in its compartment. A plastic clip or tab might be keeping it company.
  3. Say Goodbye to the Drain (Old Battery): Gently loosen the clip or tab with your fingernail or the screwdriver. Then, bid farewell to the old battery and its dwindling juice.
  4. Welcome the New Hero(New Battery): Slide in the new battery, making sure the positive side (+) greets the positive marking inside the compartment. Like superheroes uniting!
  5. Click it Sealed: Press the battery down firmly until you hear a satisfying click. The clip or tab should secure it like a superhero’s lock.
  6. Back in Action: Snap the cover back on like a puzzle piece complete. Your Yip Smart Tag is ready to track again!

Hope these six great steps will help you do a Yip Smart Tag battery replacement.

Bonus Tips Just for You Things to Keep In Mind for Yip Smart Tag Battery Replacement

Bonus Tips Yip Smart Tag Battery Replacement
  • Consult the Manual: For specific instructions for your Yip Smart Tag model, check the user manual or Yip Tracker’s website. Different models might have slight variations.
  • Be Gentle: Don’t force the back cover or the battery – let them open and close gracefully. Think of it as a superhero landing, not a crash landing.
  • Recycle Responsibly: Don’t leave the old battery feeling abandoned. Dispose of it according to your local regulations – superheroes are eco-conscious, too!
  • Stay Ahead of the Beep: Replace the battery within a week of receiving the low battery notification to avoid signal hiccups and keep your tracking uninterrupted.

Bam 💥! Your Yip Smart Tag is back in the tracking game, ready for more adventures. Spread the word, fellow trackers, and keep those batteries fresh! 😃


Q. What Battery Does the Yip Smart Tag Use?

A: The Yip Smart Tag uses a common CR2032 coin-cell battery.

Q. How Do I Open the Back Cover Yip Smart Tag?

A: Look for a small notch on the edge of the tag. Gently pry the cover away from the main body using your fingernail or the screwdriver.

Q. How Do I Remove the Old Battery Yip Smart Tag?

A: The battery will be held in place by a plastic clip or tab. Carefully release the clip and lift the old battery out.


By following these simple steps, you can easily Yip Smart Tag battery replacement, ensuring prolonged and efficient tracking of your belongings.

Keep your possessions secure and enjoy the peace of mind that comes with a well-maintained Yip Smart Tag!

Leave a Comment